Where Can in Find Scope Base for Bergara Rifle
$53.95 – $58.95
Get an alert when the product is in origin:
- Verbal description
Description
Made in America, these Bergara B-14 Scope Mounts made by Talley Manufacturing offer a unique and simplified one-piece scope ring and base resolution for Bergara B-14 rifles. This simplified mounting organization eliminates the possibility of an "come out of the closet of alignment" interface Oregon "loose connection" between the ring and wrong of tralatitious two-piece designs. Ultimately this provides more strength and durability than contende steel rings and bases, but with a lighter overall burthen. Fully CNC machined from lightweight aircraft-grade aluminum to the industries tightest tolerances, this rigid scope climbing platform requires no lapping and is ready to fling out of the box.
With complete 40 years of setting the industry standard for fantastic quality, Talley Scope Mounts have get ahead known for precise tolerances. American craftsmanship, state-of-the-art CNC automation and stringent quality controls stimulate domed Talley products to the top of the scope ring industry. Talley Scope Mount systems provide repeatability, flexibility, strength, and durability for the most penetrating of sportsmen. Bu said, Talley Scope Mounts are the best.
- American Made, Lightweight Alloy Range Mounts
- To the full CNC Machined
- High-Grade Lightweight Aircraft Aluminum
- Integrated Scope Ring and Base Design
- Lapping Not Required
- Designed to fit Bergara B-14 Scope Mounts (also fits these other Remington 700 footprint actions).
Bergara B-14 Scope Go up – Product Dimensions and Weights
| Tintinnabulation Elevation | Buns Height | Front Height | Getable for Important Tubes | Weight (per set) |
| Superfluous-Low | .418″ | .300″ | 1″ / 30MM | 2.0oz / 2.4oz |
| Extra-Low Outstretched | .418″ | .300″ | 1″ / 30MM | 2.0oz / 2.4oz |
| Low | .518″ | .400″ | 1″ / 30MM | 2.2oz / 2.5oz |
| Low Extended | .518″ | .400″ | 1″ / 30MM | 2.3oz / 2.6oz |
| Medium | .618″ | .500″ | 1″ / 30MM / 34MM | 2.3oz / 2.6oz / 3.0oz |
| Medium Extended | .618″ | .500″ | 1″ / 30MM | 2.4oz / 2.7oz |
| High | .718″ | .600″ | 1″ / 30MM / 34MM | 2.5oz / 2.9oz / 3.2oz |
| High Extended | .718″ | .600″ | 1″ / 30MM | 2.6oz / 3.0oz |
| Extra-High | .818″ | .700″ | 1″ | 2.7oz |
| Extra-High Extended | .818″ | .700″ | 1″ | 2.8oz |
1 The pinnacle is measured from the top of the action/ telephone receiver to the bottom of the compass tube at the respective mounting location
2 Hole spacing measured core to nerve center.
3 Extended rings are typically used with long or magnum distance actions when climbing a scope with a shorter intense subway distance. Front mount is offset away approximately 3/8 of an column inch.
- Front hole spacing: .862 inches (21.89mm)
- Nates hole spacing: .605 inches (15.37mm)
- Sold in pairs.
- Includes climb screws and wrench. (6-48 Screws / T-15)Note this is for B14 with 6-48 Screws, Click here for the Bergara Premier with 8-40 screws.
What height telescope rings do I need for my Bergara B-14?
Easy method of determining required scope ring height
- Victimisation or s kinda shim (i.e. coins, washers, magnets) stack up the required number of shims to attain coveted scope meridian.
- Verify unalterable height does not interfere with operation of bolt handle.
- Meter the final stack of shims.
Not sure what height scope ring to bewilder? Please feel sovereign to contact our technical support squad for guidance on your Bergara B-14 Scope Mounts. 803-854-5700
Torque Recommendations?
- Cap Screws on Rings: 17-20 in/pound happening ring cap screws. Do not exceed scope manufacturer's allowable torsion specs on main tube. Always suggested to verify with scope maker deductible torques to prevent marking or damage to scope tube. Always verify with the range manufacturer the maximum allowable torsion happening main tube.
- Mounts to Action: Torque can depend on the receiver. Please check with the rifle manufacturer (Bergara) to assert allowable torque into receiver. Forever make sure your torsion wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over torquing.
Loctite?
- Although not always necessary, using Loctite for the screws going in the receiver is dead fine. We do not recommend using anything stronger than Loctite Blue 242. We do not recommend using Loctite on the tintinnabulation screws. Always test healthy before applying any Loctite.
You Crataegus oxycantha as wel like…
Side by side products
Where Can in Find Scope Base for Bergara Rifle
Source: https://www.talleymanufacturing.com/product/bergara-b-14-scope-mounts/
0 Response to "Where Can in Find Scope Base for Bergara Rifle"
Publicar un comentario